Bosch washing machines Display Error codes and meaning
Bosch washing machines have a variety of error codes that indicate specific issues with the appliance. Here are some common error codes and their meanings:
E02 - Heating timeout. The machine is taking too long to heat up, possibly due to a faulty heater or thermistor.
E13 - Water level too high. This can be caused by a faulty water inlet valve or pressure switch.
E17 - Water supply issue. The machine is not getting enough water, potentially due to a blocked or kinked hose or a faulty water inlet valve.
E18 - Drainage issue. The machine is not draining properly, which could be caused by a blocked filter or drain hose, or a faulty drain pump.
E23 - Leak detected. There may be a leak in the machine, often detected by a float switch at the bottom of the appliance.
E24 - Drain pump fault. The drain pump is not working correctly.
E25 - Drum not turning. This can be due to a problem with the drive motor or belt.
E26 - AquaStop failure. There is an issue with the AquaStop system, which could indicate a leak or fault in the AquaStop hose.
E27 - Door lock fault. The door is not locking properly, which might be due to a defective door lock mechanism.
E29 - Water flow sensor fault. The flow sensor is not detecting water flow properly.
E31 - Communication error. There is a communication issue between the control module and other components.